Sound-devices PIX 250i Bedienungsanleitung PDF herunterladen (Seite 21)

PIX 250i User Guide

Inputs & Outputs

Any of the available 16 Tracks can be sent to the Line Outputs. Line Output routing is set in

[Audio - Line Output].

Digital Audio Outputs (HDMI/AES)

AES and HDMI Outputs are active at all times but these two outputs share the same source. At

factory default, the source of the HDMI/AES Outputs 1-8 is tracks 1 to 8, respectively. Any of the

available 8 Tracks can be sent to the HDMI/AES Outputs. HDMI/AES Output routing is set in

[Audio - HDMI/AES Output].

SDI Audio Outputs

The SDI video output embeds up to 16 channels of digital audio. At factory default, the source of the

SDI Audio Outputs 1-16 is tracks 1 to 16, respectively. Any of the availabe 16 Tracks can be sent to

the SDI Output. SDI Output routing is set in: [Audio - SDI Output].

Headphone Output

The PIX 250i is capable of driving headphones to extremely high sound pressure levels. Hearing experts

advise against exposure to high sound pressure levels for extended periods.

The PIX 250i’s headphone output is a ﬂexible tool for monitoring audio. The headphone level is

adjusted using the Headphone Volume Knob.

To quickly select a headphone source, press and hold AUDIO, then turn the Control Knob. The

Headphone Source can also be selected in the Setup Menu option [Audio - HP Source]. To solo a

track, enter the Audio Screen, highlight the track, then press AUDIO + LCD. The solo headphone

source will be indicated on the top-left of the Audio Screen (HP: Solo8 for example). To stop solo of a

track, highlight the soloed track, then press AUDIO + LCD.

Warning Bells are sent to the headphone monitor to alert the user of various states such as transport

changes, and errors such as No Media Connected or No Input Signal Detected. The loudness of these

warning bells is adjustable from Off, -60 to -12 dBFS in [System - HP Warning Bell Level]. At factory

default, the warning bells are set to -40 dBFS.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Keine Kommentare

Sound-devices PIX 250i Bedienungsanleitung Seite 21