Sound-devices PIX 250i Bedienungsanleitung PDF herunterladen (Seite 51)

PIX 250i User Guide

External Control

current versions of Chrome and Safari. Multiple rack-mounted PIX Video recorders or 970 Audio

Recorders can be accessed at the same time from the same web browser window using tabs.

In this section, the term “unit” refers to PIX 250i, PIX 260i, or PIX 270i Video Recorders, or the 970

Audio Recorder.

PIXNET only supports a single client (browser) connection to a unit at one time. Accessing PIXNET on

a single unit from multiple clients simultaneously is not supported. Control access to units with Setup

Menu option [Network - Authentication].

The PIX 250i’s web IP address must be determined before accessing PIXNET:

1. Make sure that the PIX 250i is powered on and connected to a network or directly to a com-

puter via one of the rear panel Ethernet connectors.

2. The PIX 250i must have a unique name when controlling multiple PIX 250i units via PIXNET.

Verify that the PIX 250i has a unique name in [Network - This PIX’s Name].

3. The PIX 250i can automatically nd a unique IP Address when

[Network - Auto IP Settings] is set to On. This is the recommended method for seing

up IP connections on the PIX 250i. If needed, the IP seings can be manually entered. To

manually enter IP seings, set [Network - Auto IP Settings] to Off. Then manually en-

ter [Network - IP Address - Subnet Mask -Gateway] values.

4. PIXNET supports connection to a single client. Control access to the PIX 250i by conguring a

user name and password from Setup Menu option [Network - Authentication].

5. Open the web browser and enter the IP address displayed on the PIX 250i OSD or listed in

[Network - IP Address] into the web browser’s address bar. Enter the credentials supplied in

step 4 when prompted.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 85 86

Keine Kommentare

Sound-devices PIX 250i Bedienungsanleitung Seite 51